Vigor2760 Series User’s Guide
228
2. The following setting page will appear.
Available parameters are listed below:
Item Description
Name
Type a name for such local DNS profile.
Type
Choose the type for such DNS service profile.
DNS_A – The domain name must be mapped to an IP
address.
DNS_MX – The domain name must be mapped to a mail
server.
Host Name
If DNS_A is selected as a type, simply type the name of the
host (e.g., draytek.com).
If DNS_MX is selected as a type, simply type the name of
the mail server (e.g., draytek.com).
IP Address
If DNS_A is selected as a type, type an IP address (e.g.,
192.168.1.56) for mapping to the host.
Mail Server
If DNS_MX is selected as a type, type an IP address (e.g.,
172.16.2.8) of the mail server.
Preference
Set the priority of the mail server (ranging from 0 – 65535).
This setting is available when DNS_MX is selected as the
Type.
Apply
Click it to save the settings.
To Next Page
Loading...
