Vigor2760 Series User’s Guide
66
Available parameters are listed below:
Item Description
Enable
Check the box to enable such profile.
Name
Type a name for such profile.
Description
If required, type brief description for such profile.
Profile Type
Both – Choose it to configure the settings including ADSL
and VDSL2.
ADSL – Choose it to configure the settings specified for
ADSL.
VDSL2 – Choose it to configure the settings specified for
VDSL2.
Note that the type you choose will result in different web
settings offered by this web page.
ADSL Mode
This setting is available when Both/ADSL is chosen as
Profile Type.
VPI - Stands for Virtual Path Identifier. It is an 8-bit
header inside each ATM cell that indicates where the cell
should be routed. The ATM, is a method of sending data in
small packets of fixed sizes. It is used for transferring data to
client computers.
VCI - Stands for Virtual Channel Identifier. It is a 16-bit
field inside ATM cell’s header that indicates the cell’s next
destination as it travels through the network. A virtual
To Next Page
Loading...
