126
Replacing the Master Roll
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
If the leading edge of the master is damaged,
press the master cut bar.
The leading edge of the master is automatically cut, and is
loaded.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Slide the scanner unit to return it to its original
position.
WARNING
•
Do not remove the cover affixed with Warning
Label 1.
• Personnel may be injured by the movable
cutter inside the machine.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Master cut lever
Scanner unit
To Next Page