Settings via software (OP7000)
Operating Instructions 650-10 - 03.0 - 08/2016 79
AUTO mode Selecting the sewing program
Fig. 48: Selecting the sewing program
Proceed as follows to select a sewing program:
1. Tap the desired sewing program.
Th
e selected sewing program is displayed in an activated
control field within the line.
2. Tap the OK bu
tton.
Th
e selected sewing program is loaded in AUTO operating
mode.
You can tap the Abort
button to cancel the selection of the pro-
gram.
If
necessary the selected sewing program is discarded, and
the user interface for AUTO operating mode is displayed.
To Next Page
Loading...
