Programming
Service Instructions 869-M PREMIUM - 00.0 - 07/2018 111
19.6.19 Setting the Segment length (Mode Seg.Size) parameter
Various settings can be made for the segment length. The possibilities are
explained in more detail in the table.
19.6.20 Setting the Threading mode (Threading) parameter
Various settings can be made for the threading mode. The possibilities are
explained in more detail in the table.
19.6.21 Setting the Operation lock (MachineBlockage) parameter
Various settings can be made for the operation lock. The possibilities are
explained in more detail in the table.
19.7 User config. submenu
Settings can be made here that are designed to make working on
the machine in various external conditions easier for the user.
The parameters are explained in more detail in the subchapters.
The menu is divided into the following submenus:
Menu item Setting options
Length Seam sections are measured via the length specification (in mm).
By Count Seam sections are measured via the stitch count.
Menu item Setting options
Down The sewing foot is lowered in threading mode.
Top The sewing foot is lifted in threading mode.
Pedal The sewing foot can be lifted or lowered with the pedal in threading
mode.
Menu item Setting options
Mode 0
Sewing feet remain at their last position and cannot be moved by
the operator
1
Sewing feet can be lifted using the pedal
Parameter Explanation Reference
Language Language selection p. 112
ParameterView Parameter view p. 112
Input Config Configuration of the inputs p. 113
To Next Page
Loading...
Need help?
General
