Programming
94 Service Instructions 869-M PREMIUM - 00.0 - 07/2018
19.5 Default Program submenu
Customer-specific settings can be made here, which are automatically
used as preset values for the first seam section during the creation of a
new program. Select the values so that they can be retained for as many
programs as possible.
The menu is divided into the following submenus:
19.5.1 Setting the Stitch length (Stitchlen.) parameter
Stitch length that should be set as standard when creating a new program.
To set the stitch length parameter:
1. Select the Stitchlen. parameter.
2. Press the OK button to confirm the selection.
3. Enter the desired value.
4. Press the OK button to confirm the value.
Parameter Explanation Reference
Stitch length Stitch length p. 94
Foot Press. Foot Press. p. 95
Thr.Tens. Needle thread tension p. 95
Foot Stroke Sewing foot stroke p. 95
Start bartack Start bartack p. 96
End bartack End bartack p. 96
Thread Trim Thread cutter p. 96
DailyPieces Daily pieces counter p. 96
NOTICE
Property damage may occur!
The machine and the sewing equipment may be damaged.
ALWAYS adjust the stitch length to the selected sewing equipment.
To Next Page
Loading...
Need help?
General
