Maintenance
142 Service Instructions 869-M PREMIUM - 00.0 - 07/2018
20.1 Cleaning
Lint and thread remnants should be removed after every 8 operating hours
using a compressed air gun or a brush. If very fluffy sewing material is
being sewn the machine must be cleaned more frequently.
Fig. 110: Cleaning
WARNING
Risk of injury from flying particles!
Flying particles can enter the eyes, causing injury.
Wear safety goggles.
Hold the compressed air gun so that the particles
do not fly close to people.
Make sure no particles fly into the oil pan.
NOTICE
Property damage from soiling!
Lint and thread remnants can impair the operation of the machine.
Clean the machine as described.
NOTICE
Property damage from solvent-based cleaners!
Solvent-based cleaners will damage paintwork.
Use only solvent-free substances for cleaning.
(1) - Area around the needles
(2) - Hook
(3) - Area under the throat plate
(4) - Cutter on the winder
To Next Page
Loading...
Need help?
General
