Programming
Service Instructions 869-M PREMIUM - 00.0 - 07/2018 91
19 Programming
This chapter deals exclusively with content on the Technician level. For a
description of how to create programs or how to make changes to the
sewing parameters, the programming on the Operator level is explained
in the Operating Instructions 869-M PREMIUM.
19.1 Calling up the Technician level
A password is requested to make it possible to make changes on the
Technician level.
To access the Technician level:
1. Switch on the machine.
2. Press the P and S buttons at the same time.
The display shows the input screen for the password:
Fig. 81: Password input screen
3. Use the numeric buttons to enter the password (25483).
You are on the Technician level:
19.2 Structure of the software
After the Technician level opens, the display shows the menu items for the
protected area. The following table lists the menu items and gives a brief
explanation.
Submenu Description Reference
Lock Techn. Lock the Technician level p. 92
ParameterCall Parameter selection
(visible only when activated)
p. 92
Default Program Program presettings p. 94
Machine config. Machine configuration p. 97
User config. User configuration p. 111
Service Service p. 124
Counter Counter p. 131
Reset Reset data p. 131
Data transfer Data transfer p. 132
1.9
51
Code
To Next Page
Loading...
Need help?
General
