Programming
Service Instructions 869-M PREMIUM - 00.0 - 07/2018 131
Calibration of the Pedal (Pedal)
Only one value needs to be checked when calibrating the pedal.
To calibrate the pedal:
1. Call up the Service > Calibration > Pedal menu item.
2. Follow the instructions on the display.
19.8.4 Displaying the Error list (Error Log) parameter
The error list shows the errors that have occurred in the form of a list.
The list can be exported to a USB key, p. 137.
19.9 Counter submenu
Use this menu item to view the readings of the various counters. They are
intended for information only – no settings can be made.
19.10Reset data (Reset) submenu
Use this submenu to reset the data of the machine. Various settings can
be made for resetting the data. The possibilities are explained in more
detail in the table.
Access is possible only by entering the password 25483 again.
Abbreviation Meaning
P.C. Piece Counter
Piece counter showing the number of sewing items that the machine
has sewn so far.
P.C.D. Piece Counter Daily
Daily pieces counter, showing the number of sewing items that the
machine has sewn since the last reset.
S.C. Stitch Counter
Number of stitches that the machine has sewn so far.
B.C. Bobbin Counter
Number of stitches that have been sewn with the bobbin since the
last reset.
NOTICE
Property damage may occur!
Data and settings of the machines may be irretrievably lost.
Consider BEFORE the reset exactly which data need to be deleted.
To Next Page
Loading...
Need help?
General
