Programming
136 Service Instructions 869-M PREMIUM - 00.0 - 07/2018
Fig. 104: Data Transfer submenu
2. Call up the Service > Data Transfer > Programs menu item.
3. Press the OK button to confirm the selection.
4. Use the
▲/▼ buttons to choose between the options Load from USB
or Store to USB.
5. Press the OK button to confirm.
The following warning message appears:
Fig. 105: Data loss warning message
6. Select a program with the ▲/▼ buttons.
7. Press the OK button to confirm the selection.
A check mark in front of the program name shows that it has been
selected.
8. Repeat the selection for all the desired programs or select all programs
at the same time (see next step).
9. Press the
► button; the selection Destination, Select All,
Deselect All appears.
10. Select the Select All option with the
▲/▼ buttons.
(1) - Connection (2) - Control
OK ESC
USB-Stick löschen
To Next Page
Loading...
