EDAN F9 Express - Appendix 7 EMC Information; A7.1 Electromagnetic Emissions

F9, F9 Express Fetal & Maternal Monitor User Manual EMC Information
- 194 -
Appendix 7 EMC Information
A7.1 Electromagnetic Emissions
Guidance and manufacture’s declaration – electromagnetic emission
The F9 and F9 Express Fetal & Maternal Monitors are intended for use in the electromagnetic
environment specified below. The customer of the user of the F9 and F9 Express Fetal & Maternal
Monitors should assure that it is used in such and environment.
Emission test
Compliance
Electromagnetic environment – guidance
RF emissions
CISPR 11
Group 1
The F9 and F9 Express Fetal & Maternal
Monitors use RF energy only for its internal
function. Therefore, its RF emissions are very
low and are not likely to cause any interference
in nearby electronic equipment.
RF emission
CISPR 11
Class A
The F9 and F9 Express Fetal & Maternal
Monitors are suitable for use in all
establishments, other than domestic and those
directly connected to the public low-voltage
power supply network that supplies buildings
used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Complies