F9, F9 Express Fetal & Maternal Monitor User Manual Introducing the Monitor
- 15 -
Chapter 2 Introducing the Monitor
2.1 Installation Guide
NOTE:
Installation must be carried out by qualified personnel authorized by the manufacturer.
2.1.1 Opening the Package and Checking
Visually examine the package prior to unpacking. If any signs of mishandling or damage are
detected, contact the carrier to claim for damage.
Open the package; take out the monitor and accessories carefully. Keep the package for possible
future transportation or storage. Check the components according to the packing list.
Check for any mechanical damage.
Check all the cables and accessories.
If there is any problem, contact us or your local distributor immediately.
2.1.2 Installing Battery
If your monitor has been configured with the rechargeable lithium-ion battery, follow these steps
to install the battery:
WARNING
Switch off the monitor and unplug it before installing or removing the battery.
(1) Battery Installation
a) Carefully place the monitor upside down on a flat surface covered with cloth or other type of
protecting pad.
b) Remove the screws of the battery compartment using a cross-head screw driver. Remove the
battery compartment cover.
To Next Page
Loading...
Need help?
General
