F9, F9 Express Fetal & Maternal Monitor User Manual Printing
- 70 -
A list of current date, time, print speed, ID, Name, FHR2 offset, HR,
SpO
2
and TEMP is printed at the start of the monitoring and every 10
minutes/20 minutes/30 minutes/ 60 minutes(optional) afterwards.
The annotation of the event mark below.
The trace marked with “HR” is the maternal HR trace.
The trace marked with “SpO
2
” is the maternal SpO
2
trace.
In the real-time printing mode, each NIBP measurement result is
printed on the paper in the order of SYS/DIA/MAP/PR.
Each recorder paper pack has 150 pages. When you notice the page
mark comes to the end, remember to load new paper in time.
The CTG analysis results of FHR1 and FHR2.
It indicates the physiological alarm message(a), signal overlap alarm
message(b), US1 and US2 signal loss message(c).
Wired and
wireless
monitoring mark
In the process of monitoring, if one channel changes between wired
and wireless monitoring status, then wired mark (d) and wireless
mark(e) will be printed according to the current data source of the
channel.