Eldes ESIM264 - Voice Calls Settings

MANUAL ELDES ESIM264 V2.0 127
SMS
N/A
EKB2
Menu path:
OK → CONFIGURATION → ARC SET → COMMUNICATION → DEVICE ID → [XXXX]
Value: [XXXX] – 4 digit device ID code, range – [0000... 9999]
EKB3
Enter parameter 47 & Device ID code:
[47xxxx#]
Value: xxxx – 4 digit device ID code, range – [0000... 9999]
The 4-digit ID code of the alarm system intended for system identication by EGR100 softwa-
re. This ID code is indicated as Unit ID in EGR100 software.
This parameter can be set and edited using ELDES Conguration Tool and SMS only.
Device ID (GPRS)
9.3.3 Voice Calls Settings
SMS
N/A
EKB2
Menu path:
OK → CONFIGURATION → ARC SET
→ ARC STATION NUM → TEL. NUMBER [1... 3] → [XXXXXXXXXXXXXXX]
Value: [XXXXXXXXXXXXXXX] – up to 15 digits phone number
EKB3
Enter parameter 26, number of phone number entry & phone number
[26xxyyyyyyyyyyyyyyy#]
Value: xx – number of monitoring station phone number entry, range – [01...
03]; yyyyyyyyyyyyyyy – up to 15 digits phone number
The system supports up to 3 monitoring station phone numbers for communication with the
alarm system via voice calls (GSM audio channel). Tel. Number 1 is mandatory, the other two
are not necessary. All numbers must be entered starting with international country code e.g.
44[area code][local number]. The plus character is not necessary.
Set Monitoring
Station Phone
Number (Voice Calls)