MANUAL ELDES ESIM264 V2.0 51
SMS
SMS text:
XXXX_INFO
Example: 1111_INFO
EKB2
N/A
EKB3
N/A
SMS
SMS text:
XXXX_INFO:PP.TT
Value: [PP] – SMS sending period in days, range – [1... 99]; [TT] – SMS sending
period in hours, range - [1... 23]
Example: 1111_INFO:4.16
EKB2
Menu path:
OK → CONFIGURATION → PRIMARY SET → INFO SMS SCHED → PERIOD → [PP]
OK → CONFIGURATION → PRIMARY SET → INFO SMS SCHED → TIME → [TT]
Value: [PP] – SMS sending period in days, range - [1... 99]; [TT] – SMS sending
period in hours, range - [1... 23]
EKB3
Enter parameter 11, SMS sending time & period:
[11xxyy#]
Value: xx – SMS sending period in hours, range - [1... 23]; yy - SMS sending
period in days, range - [1... 99]
This SMS report provides information on alarm system status (armed/disarmed), GSM signal
strength, man power supply status, temperature of secured area (if temperature sensor is
used), zone state (alarm/restore).
The system periodically sends Info SMS to User 1 at the set period of time. By default this
period is at 11:00 AM daily (period – 1, time - 11) .
Info SMS
Set Periodic
Info SMS
5.4.9 Info SMS
To Next Page
Loading...
