62
5.4.16 Partitions
SMS
N/A
EKB2
Menu path:
OK → CONFIGURATION → PRIMARY SET →
KEYBOARD PARTITION → KBRD [1... 10] → PARTITION [0... 1]
EKB3
Enter parameter 51, keyboard number & partition:
[51xxy#]
Value: xx – keyboard number, range – [01... 04]; y – partition, range – [0... 1]
SMS
N/A
EKB2
Menu path:
P1 → PART[0... 1] | [custom name]
EKB3
Hold [*] key for 3 seconds and press [0] or [1] key.
Value: [0] key – partition 0; [1] key – partition 1.
SMS
N/A
EKB2
Menu path:
OK → CONFIGURATION → PRIMARY SET →
KEYBOARD PARTITION → PARTITION SWITCH → ENABLE
EKB3
Enter parameter 77 & parameter status value:
[771#]
System partition which every keyboard is assigned to. By default, new added keyboard is as-
signed to partition 0.
This feature allows to temporally switch between keyboard partitions. The partition is auto-
matically switched back to the previous one in 3 minutes after the last key-touch/key-stroke.
By default, this feature is disabled.
This command enables keyboard partition switch. By default this feature is disabled.
Set Keyboard Partition
Switch Between
Keyboard Partitions
Enable Keyboard
Partition Switch
To Next Page
Loading...
