Eldes ESIM264 - GPRS Network Settings

MANUAL ELDES ESIM264 V2.0 123
9.3.2 GPRS Network Settings
SMS
SMS text:
XXXX_setgprs:ip:0.0.0.0
Value: 0.0.0.0 – Server IP address digits
EKB2
Menu path:
OK → CONFIGURATION → ARC SET → GPRS SETTINGS → SERVER IP → [0.0.0.0]
Value: [0.0.0.0] – Server IP address digits
EKB3
Enter parameter 40 & Server IP address:
[40xxxxxxxxxxxx]
Value: xxxxxxxxxxxx – Server IP address digits
Public IP address of the monitoring station. This parameter is intended for communication
between the alarm system and monitoring station via GPRS network.
Server IP address
(GPRS)
SMS
SMS text:
XXXX_setgprs:dns1:0.0.0.0
Value: 0.0.0.0 – DNS1 IP address digits
EKB2
Menu path:
OK → CONFIGURATION → ARC SET → GPRS SETTINGS → DNS1 → [0.0.0.0]
Value: [0.0.0.0] – DNS1 IP address digits
EKB3
Enter parameter 41 & DNS1 IP address:
[41xxxxxxxxxxx]
Value: xxxxxxxxxxxx – DNS1 IP address digits
Primary DNS server IP address.
DNS1 Server IP
Address (GPRS)
SMS
SMS text:
XXXX_setgprs:dns2:0.0.0.0
Value: 0.0.0.0 – DNS2 IP address digits
EKB2
Menu path:
OK → CONFIGURATION → ARC SET → GPRS SETTINGS → DNS2 → [0.0.0.0]
Value: [0.0.0.0] – DNS2 IP address digits
EKB3
Enter parameter 42 & DNS2 IP address:
[42xxxxxxxxxxx]
Value: xxxxxxxxxxxx – DNS2 IP address digits
Secondary DNS server IP address.
DNS2 server IP
address (GPRS)