Eldes ESIM264 - CSD Settings

MANUAL ELDES ESIM264 V2.0 129
9.3.4 CSD Settings
SMS
N/A
EKB2
Menu path:
OK → CONFIGURATION → ARC SET → CSD SETTINGS →
TEL NUMBER→ [XXXXXXXXXXXXXXX]
Value: [XXXXXXXXXXXXXXX] – up to 15 digits phone number
EKB3
Enter parameter 85 & monitoring station phone number:
[85xxxxxxxxxxxxxxx#]
Value: xxxxxxxxxxxxxxx – up to 15 digits phone number
SMS
N/A
EKB2
Menu path:
OK → CONFIGURATION → ARC SET→ CSD SETTINGS→ATTEMPTS → [XX]
Value: [XX] - number of CSD attempts, range - [0... 10]
EKB3
Enter parameter 84 & number of CSD attempts:
[84xx#]
Value: xx - number of CSD attempts, range - [00... 10]
The system supports 1 monitoring station phone number for communication with the alarm
system via CSD connection. The number must be entered starting with international country
code e.g. 44[area code][local number]. The plus character is not necessary.
This command sets the number of CID data transmission attempts via CSD connection in case
the initial attempt was unsuccessful. The default value is 3.
Set Monitoring
Station Phone
Number (CSD)
CSD Attempts