Eldes ESIM264 - Default Parameters & Ways of Parameter Configuration

MANUAL ELDES ESIM264 V2.0 9
1.3 Default Parameters & Ways of Parameter Conguration
Main Parameters
Parameter Default Value
Congurable by:
SMS EKB2 EKB3 Conguration Tool
SMS & EKB2 Menu Language Depends on rmware version according to user‘s location
   
SMS Password 0000
   
User (Keyboard) Password 1 1111
  
User (Keyboard) Password 2... 10 N/A
  
Administrator Password 1470
  
Duress Password N/A
  
SGS Password N/A
  
User 1... 5 Phone Number N/A
   
Allow Only Preset Users Enabled
   
Answer Call Disabled

Date & Time N/A
   
Zones
Parameter Default Value
Congurable by:
SMS EKB2 EKB3 Conguration Tool
Zone Alarm Text
Z1 - Door sensor triggered, Z2 - Windows sensor triggered, Z3 - Fire sensor
triggered, Z4 - Motion1 sensor triggered, Z5 - Motion2 sensor triggered,
Z6 - Motion3 sensor triggered etc.
 
Entry Delay 15 seconds
   
On-Board Zone Delay 800 milliseconds

EPGM1 Zone Delay 800 milliseconds

On-board Z1 Zone Type Delay
  
Exit Delay 15 seconds
   
On-board Z2... Z12 Zone Type Instant
  
Keyboard Zone Type Instant
  
EPGM1 Zone Type Instant
  
Wireless Zone Type Depends on the connected wireless device
  
Virtual Zone Type Follow
 
ATZ Mode Disabled
  
Zone Connection Type when ATZ Mode Dis-
abled
Type 1
  
Zone Connection Type when ATZ Mode En-
abled
Type 4
  
On-board Zone Status Enabled
   
Keyboard Zone Status Disabled
   
EPGM1 Zone Status Enabled
   
Wireless Zone Status Enabled
   
Virtual Zone Status Disabled
 
Stay Mode for Particular Zone Disabled
  
Arm-Disarm by Zone N/A
  
Force Mode for Particular Zone Disabled
  
Tamper Name Tamper 1, Tamper 2, Tamper 3, Tamper 4, Tamper 5, Tamper 6 etc.

Chime Enabled
  
PGM Outputs
Parameter Default Value
Congurable by:
SMS EKB2 EKB3 Conguration Tool
PGM Output Name C1 – Controll1, C2 – Controll2, C3 – Controll3, C4 – Controll4 etc.
 
PGM Output Status Disabled
   
EPGM8 PGM Output Status Disabled
   
EPGM1 PGM Output Status Disabled
  
Wireless PGM Output Status Enabled
   
Wireless PGM Output Type Depends on the connected wireless device

Automatic PGM Output Control 1... 16 Disabled
 
Automatic PGM Output Control Management N/A

Scheduler 1... 16 Disabled

Turn ON/OFF PGM Output by Timer N/A

EPGM8 Mode Disabled
  
Siren
Parameter Default Value
Congurable by:
SMS EKB2 EKB3 Conguration Tool
Siren Alarm Duration 1 minute
   
Bell Squawk Disabled
  
Siren ON if RF Signal is Lost Disabled
  