Eldes ESIM264 - Notification about Main Power Supply Status

58
SMS
SMS text:
XXXX_TEMP
Example: 1111_TEMP
EKB2
Menu path:
OK → CONFIGURATION → PRIMARY SET → TEMP SENSOR → TEMP. MIN
OK → CONFIGURATION → PRIMARY SET → TEMP SENSOR → TEMP. MAX
EKB3
N/A
This command indicates the lowest. & highest temperature limit boundaries set.
See Temperature
Limit Min. &
Max Values
5.4.13 Main Power Supply Status Notications
SMS
SMS text:
XXXX_M:OFF
Example: 1111_M:OFF
EKB2
Menu path:
OK → CONFIGURATION → PRIMARY SET →
POWER STATUS → CHECK EXT. PWR ST → DISABLE
EKB3
Enter parameter 13 & parameter status value:
[130#]
After the main power is lost or restored, the system noties all preset users by SMS message.
By default this feature is enabled.
Disable Main Power
Supply Status SMS