Eldes ESIM264 - Page 57

MANUAL ELDES ESIM264 V2.0 57
SMS
N/A
EKB2
Menu path:
OK → CONFIGURATION → PRIMARY SET → TEMP SENSOR → INFO SMS → ENABLE
EKB3
Enter parameter 50 & parameter status value:
[501#]
SMS
SMS text:
XXXX_TEMP:min:max
Value: min - lowest temperature limit boundary in
o
C, range - [-55... 125]; max -
highest temperature limit boundary in
o
C, range - [-55... 125]
EKB2
Menu path:
OK → CONFIGURATION → PRIMARY SET → TEMP SENSOR → TEMP. MIN → [XXX]
Value: [XXX] – lowest temperature limit boundary in
o
C, range - [-55... 125]
Keyboard keys P1 or P2 are used to enter minus symbol, e.g. -20
EKB3
Enter parameter 19 & temperature value:
[19x#]
Value: x - lowest temperature limit boundary in
o
C, range - [-55... 125]
00 stands for minus symbol, i. e. 0020 = -20
SMS
SMS text:
XXXX_TEMP:min:max
Value: min - lowest temperature limit boundary in
o
C, range - [-55... 125]; max -
highest temperature limit boundary in
o
C, range - [-55... 125]
EKB2
Menu path:
OK → CONFIGURATION → PRIMARY SET → TEMP SENSOR → TEMP. MAX → [XXX]
Value: [XXX] - highest temperature limit boundary in
o
C, range - [-55... 125]
Keyboard keys P1 or P2 are used to enter minus symbol, e.g. -20
EKB3
Enter parameter 20 & temperature value:
[20x#]
Value: x - lowest temperature limit boundary in
o
C, range - [-55... 125]
00 stands for minus symbol, i. e. 0020 = -20
This command enables Temperature Limit Info SMS.
Set the value of minimum temperature limit boundary which causes Temperature Limit Info
SMS to be sent to preset all users when the limit is exceeded.
Set the value of maximum temperature limit boundary which causes Temperature Limit Info
SMS to be sent to all preset users when the limit is exceeded.
Enable Temperature
Limit Info SMS
Set Temperature Limit
Boundary – Min. Value
Set Temperature Limit
Boundary – Max. Value