Eldes ESIM264 - EWS1 - Wireless Indoor Siren; Technical Specifications; Electrical & Mechanical Characteristics; Main Unit & LED Functionality

110
8.6 EWS1 – Wireless Indoor Siren
EWS1 is a wireless device with built-in siren speaker and operates with ELDES wireless alarm systems. EWS1 has to be bind to the
alarm system by sending a corresponding SMS message or using software ELDES Conguration Tool. Upon successful EWS1 binding,
the system adds one wireless zone and one wireless PGM output. The wireless zone is used to monitor the device (tamper - when the
batteries are being removed) and the wireless PGM output is used to control the speaker. In case of alarm, the siren provides a sound
alarm for one minute. The conguration of this parameter is disabled for EWS1 in order to save the battery power.
It is possible to connect up to 16 EWS1 devices to the alarm system at a time. The maximum wireless connection range is 150 meters
(in open areas).
8.6.1 Technical Specications
8.6.1.1 Electrical & Mechanical Characteristics
Battery Type 1,5V Alkaline AA type
Number of Batteries 3
Battery Operation Time ~18 months*
Wireless Transmitter-Receiver Frequency 868 Mhz
Range of Operating Temperatures -20...+55ºC
Dimensions 123x73x36mm
Wireless Communication Range Up to 30 meters in premises; up to 150 meters in open areas
Compatible with Alarm Systems ELDES Wireless
* This operation time might vary in dierence conditions.
8.6.1.2 Main Unit & LED Functionality
RESET Button for restoring default parameters
+ / - Battery slots
LED EWS1 status indication
BATTERY
RESETLED
+
-
BATTERY
+
-
BATTERY
-
+
Fig. No. 43