Eldes ESIM264 - User Phone Numbers

28
N/A
Menu path:
OK → CONFIGURATION → PRIMARY SET → PASSWORD → KEYBOARD PSW →
SGS PSW → N/A / [1... 10]
Enter parameter 74 & user (keyboard) password number:
[74xx#]
Value: xx – user (keyboard) password number, range - [01... 10]
SMS text:
XXXX_NR1:YYYYYYYYYYYYYYY_NR2:VVVVVVVVVVVVVVV_ NR3:ZZZZZZZZZZZZZZZ_
NR4:UUUUUUUUUUUUUUU_NR5:NNNNNNNNNNNNNNN
Value: YYYYYYYYYYYYYYY – up to 15 digits user phone number
Example: 1111_NR1:4411111111111
Menu path:
OK → CONFIGURATION → PRIMARY SET → CALL/SMS SET →
USER → USER [1... 5] → NUMBER → [XXXXXXXXXXXXXXX]
Value: [XXXXXXXXXXXXXXX] – up to 15 digits user phone number
Enter parameter 17, user number & phone number:
[17xxYYYYYYYYYYYYYYY#]
Value: xx – user number, range – [1... 5]; YYYYYYYYYYYYYYY – up to 15 digits user
phone number
EKB2
EKB2
EKB3
EKB3
This command assigns one of the user (keyboard) passwords which is used to notify the
monito ring station about the arrival of security guards. The system transmits a data message
to the monitoring station and disarms the alarm system after entering this password.
The system supports up to 5 authorized phone number entries allowing system conguration
and control by SMS. User 1 phone number is mandatory while other phone number entries
are not necessary. All numbers must be entered starting with international country code e.g.
44[area code][local number]. The plus symbol is not necessary.
Set Security Guard
Service Password
Set User Phone
Number
SMS
SMS
5.4.3 User Phone Numbers