52
SMS
SMS text:
XXXX_INFO:00.00
Example: 1111_INFO:00.00
EKB2
Menu path:
OK → CONFIGURATION → PRIMARY SET → INFO SMS SCHED → PERIOD → [0]
OK → CONFIGURATION → PRIMARY SET → INFO SMS SCHED → TIME → [0]
EKB3
Enter parameter 11 & parameter status value:
[110000#]
SMS
N/A
EKB2
Menu path:
OK → CONFIGURATION → PRIMARY SET →
CALL/SMS SET → DIS CALL DUR ALM. → ENABLE
EKB3
Enter parameter 30 & parameter status value:
[301#]
This command disables Periodic Info SMS.
In case of alarm, the system makes a phone call to User 1. The phone call is made to the next
user in a row in case the previous user was unreachable (was „out of radio coverage“ or provi-
ded engaged signal). By default, this feature is enabled.
Disable Periodic
Info SMS
Disable Call in
Case of Alarm
NOTE: The system will not make a phone call to the next user in a row if the previous user was reachable, but did not answer or rejected
the phone call.
5.4.10 Alarm Notications
To Next Page
Loading...
