MANUAL ELDES ESIM264 V2.0 53
SMS
N/A
EKB2
Menu path:
OK → CONFIGURATION → PRIMARY SET →
CALL/SMS SET → DIS CALL DUR ALM. → DISABLE
EKB3
Enter parameter 30 & parameter status value:
[300#]
SMS
N/A
EKB2
Menu path:
OK → CONFIGURATION → PRIMARY SET → CALL/SMS SET → DIS SMS DUR ALM. → ENABLE
EKB3
Enter parameter 31 & parameter status value:
[311#]
SMS
N/A
EKB2
Menu path:
OK → CONFIGURATION → PRIMARY SET →
CALL/SMS SET → DIS SMS DUR ALM. → DISABLE
EKB3
Enter parameter 31 & parameter status value:
[310#]
This command enables phone calls in case of alarm.
In case of alarm the system sends an SMS message to User 1. The SMS message is sent to the
next preset user in a sequence in case the system does not receive a successful SMS message
delivery conrmation in 20 seconds from the recipient. By default this feature is enabled.
This command enables SMS messages in case of alarm.
Enable Call in
Case of Alarm
Disable SMS in
Case of Alarm
Enable SMS in
Case of Alarm