Eldes ESIM264 - Managing Ibutton Keys

MANUAL ELDES ESIM264 V2.0 97
7.7.3 Managing iButton® Keys
The procedure of adding an iButton® key to the system is performed by touching the iButton® key to the iButton® key reader
when New iButton® Key mode is enabled (see Fig. No. 30). Alarm system ESIM264 supports up to 5 iButton® keys with dierent IDs.
NOTE: iButton® key1 ID can be added without New iButton® Key mode being enabled.
Fig. No. 30
NOTE: When attempting to add the same iButton® Key ID twice, the system will consider this action as arming/disarming despite the
New iButton® Key mode status.