Eldes ESIM264 - System Control from any Phone Number

MANUAL ELDES ESIM264 V2.0 61
5.4.15 System Control from Any Phone Number
SMS
SMS text:
XXXX_STR:OFF
Example: 1111_STR:OFF
EKB2
Menu path:
OK → CONFIGURATION → PRIMARY SET →
PASSWORD → ALLOW ONLY PRS USR → DISABLE
EKB3
Enter parameter 12 & parameter status value:
[120#]
SMS
SMS text:
XXXX_STR:ON
Example: 1111_STR:ON
EKB2
Menu path:
OK → CONFIGURATION → PRIMARY SET →
PASSWORD → ALLOW ONLY PRS USR → ENABLE
EKB3
Enter parameter 12 & parameter status value:
[121#]
The system accepts control and conguration SMS messages from 5 preset user phone num-
bers only. By disabling this feature, the system will accept SMS messages from any user who
knows the correct SMS password. By default, this feature is enabled.
This command enables Allow Only Preset Users feature.
Disable Allow Only
Preset Users
Enable Allow Only
Preset Users