Eldes ESIM264 - Page 54

54
SMS
SMS text:
XXXX_SMSALL:ON
Example: 1111_SMSALL:ON
EKB2
Menu path:
OK → CONFIGURATION → PRIMARY SET →
CALL/SMS SET → SMS ALL → ENABLE
EKB3
Enter parameter 21 & parameter status value:
[211#]
SMS
SMS text:
XXXX_SMSALL:OFF
Example: 1111_SMSALL:OFF
EKB2
Menu path:
OK → CONFIGURATION → PRIMARY SET → CALL/SMS SET → SMS ALL → DISABLE
EKB3
Enter parameter 21 & parameter status value:
[210#]
In case of alarm, the system simultaneously sends SMS messages to all preset users as the sys-
tem does not require SMS message delivery conrmation. By default, this function is disabled.
This command disables sending SMS messages to all users simultaneously in case of alarm.
Enable SMS to All
Users Simultaneously
in Case of Alarm
Disable SMS to All
Users Simultaneously
in Case of Alarm