Eldes ESIM264 - Page 27

MANUAL ELDES ESIM264 V2.0 27
N/A
Menu path:
OK → CONFIGURATION → PRIMARY SET → PASSWORD → KEYBOARD PSW →
REMOVE PSW → [XXXX]
Value: [XXXX] – 4-digit user (keyboard) password, range - [0000... 9999]
Enter parameter 65 & user (keyboard) password:
[65xxxx#]
Value: xxxx – 4-digit user (keyboard) password, range - [0000... 9999]
N/A
Menu path:
OK → CONFIGURATION → PRIMARY SET → PASSWORD → ADMIN PSW → [XXXX]
Value: [XXXX] – 4-digit administrator password, range - [0000... 9999]
Enter parameter 16 & administrator password:
[16xxxx#]
Value: xxxx – 4-digit administrator password, range - [0000... 9999]
N/A
Menu path:
OK → CONFIGURATION → PRIMARY SET → PASSWORD → KEYBOARD PSW →
DURESS PSW → N/A / [1... 10]
Enter parameter 73 & user (keyboard) password number:
[73xx#]
Value: xx – user (keyboard) password number, range - [01... 10]
EKB2
EKB2
EKB2
EKB3
EKB3
EKB3
This command erases a particular user (keyboard) password. It is possible to delete the pass-
word assigned to the same partition as the keyboard only.
The 4-digit administrator password providing access to system conguration. It is recommen-
ded to change the default admin password which is 1470.
This command assigns one of the user (keyboard) passwords which is used in case of alarm
sys tem disarm demanded by force. The system also sends a silent alert data message to
monito ring station after system disarming using this password.
Delete User
(Keyboard) Password
Set Administrator
Password
Set Duress
Password
SMS
SMS
SMS
See also chapter 5.4.16 Partitions.