Eldes ESIM264 - Page 44

44
SMS
N/A
EKB2
Menu path:
OK → CONFIGURATION → PRIMARY SET → CALL/SMS SET → CHIME → ENABLE
EKB3
Enter parameter 32 & parameter status value:
[321#]
SMS
SMS text:
XXXX_STATUS
Example: 1111_STATUS
EKB2
Menu path:
OK → CONFIGURATION → ZONES → WIRED ZONES → [ZONE 1... 12] → STATUS
OK → CONFIGURATION → ZONES → WIRELESS ZONES → RF ZONE [1... 16] → STATUS
OK → CONFIGURATION → ZONES →
KEYBOARD ZONES → [1ST... 4TH] KEYBOARD ZONE → STATUS
OK → CONFIGURATION → ZONES → EPGM ZONES → EPGM ZONE [1... 16] → STATUS
OK → CONFIGURATION → PGM OUTPUTS → PGM OUTPUTS → OUTPUT [1... 12] → STATUS
OK → CONFIGURATION → PGM OUTPUTS → RF OUTPUTS → RF OUTPUT [1... 32] → STATUS
EKB3
N/A
This command enables Chime feature.
This feature provides the list of zone and PGM output statuses (enabled/disabled, turned on/
o). In addition, the SMS message contains zone alarm texts, PGM output names and alarm
system status (armed/disarmed).
Enable Chime
List Zone & PGM
Output Status
See also chapter 5.4.16 Partitions.