Eldes ESIM264 - Page 66

66
SMS
N/A
EKB2
Menu path:
OK → CONFIGURATION → PRIMARY SET → LOG SET → ENABLE
EKB3
Enter parameter 36 & parameter status value:
[361#]
SMS
N/A
EKB2
Menu path:
OK → CONFIGURATION → PRIMARY SET → GSM AUDIO → MIC LEVEL → [XX]
Value: [XX] – microphone volume level, range – [0... 15]
EKB3
N/A
SMS
N/A
EKB2
Menu path:
OK → CONFIGURATION → PRIMARY SET → GSM AUDIO → SPEAKER LEVEL → [XX]
Value: [XX] – speaker volume level, range – [0... 100]
EKB3
N/A
This command enables Event Log feature.
This command allows to set microphone connected to alarm system volume level. Default
microphone volume level is 12.
This command allows to set speaker connected to alarm system volume level. Default spea-
ker volume level is 85.
Enable Event Log
Microphone Level
Speaker Level