Endress+Hauser Proline Promass 83 - Page 16

3 Block MEASURED VARIABLES Device Functions Proline Promass 83 FOUNDATION Fieldbus
16 Endress+Hauser
UNIT CORRECTED
VOLUME FLOW
(0404)
Use this function to select the unit for displaying the corrected volume flow
(corrected volume/time).
The unit you select here is also valid for:
• Switching points (limit value for corrected volume flow, flow direction)
• Low flow cut off
Options:
Metric → Nl/s; Nl/min; Nl/h; Nl/day; Nm
3
/s; Nm
3
/min; Nm
3
/h; Nm
3
/day
US → Sm
3
/s; Sm
3
/min; Sm
3
/h; Sm
3
/day; Scf/s; Scf/min; Scf/h; Scf/day
Factory setting:
Nm
3
/h
UNIT CORRECTED
VOLUME
(0405)
Use this function to select the unit for displaying the corrected volume.
The unit you select here is also valid for:
• Pulse weighting (e.g. Nm
3
/p)
Options:
Metric → Nm
3
; Nl
US → Sm
3
; Scf
Factory setting:
Nm
3
! Note!
The unit of the totalizers is independent of your choice here. The unit for each totalizer
is selected separately for the totalizer in question.
Function description
MEASURED VARIABLES → SYSTEM UNITS → CONFIGURATION