Device Functions Proline Promass 83 FOUNDATION Fieldbus 5 Block USER INTERFACE
Endress+Hauser 25
DEFINE
PRIVATE CODE
(2021)
Use this function to specify a personal code for enabling programming in the function
ACCESS CODE.
User input:
0 to 9999 (max. 4-digit number)
Factory setting:
83
! Note!
• If the code number is "0", programming is always enabled.
• Programming has to be enabled before this code can be changed. When
programming is disabled this function is not available, thus preventing others from
accessing your personal code.
STATUS ACCESS
(2022)
Use this function to check the access status for the function matrix.
Display:
ACCESS CUSTOMER (parameterization enabled)
LOCKED (parameterization disabled)
ACCESS CODE
COUNTER
(2023)
Displays how often the customer code, service code or the digit "0" (code-free)
has been entered to gain access to the function matrix.
Display:
Max. 7-digit number: 0 to 9999999
Factory setting:
0
Function description
USER INTERFACE → CONTROL → UNLOCKING/LOCKING
To Next Page
Loading...
