Endress+Hauser Proline Promass 83 - Function Group FLOW COEFFICIENT

7 Block BASIC FUNCTION Device Functions Proline Promass 83 FOUNDATION Fieldbus
62 Endress+Hauser
7.4.2 Function group FLOW COEFFICIENT
BASIC FUNCTION G
⇒
FOUNDATION FIELDBUS GGA
⇓
PROCESS PARAMETER GIA
⇓
SYSTEM PARAMETER GLA
⇓
SENSOR DATA GNA
⇒
CONFIGURATION 680
⇓
FLOW COEF. 684
Function description
BASIC FUNCTION → SENSOR DATA → FLOW COEFFICIENT
All flow coefficients are set at the factory. All the sensor's parameter settings are saved on the S-DAT memory chip.
Contact the Endress+Hauser service organization if you have any questions about these functions.
TEMPERATURE
COEFFICIENT KM
(6840)
This function shows the temperature coefficient KM.
TEMPERATURE
COEFFICIENT KM2
(6841)
This function shows the temperature coefficient KM2.
TEMPERATURE
COEFFICIENT KT
(6842)
This function shows the temperature coefficient KT.
CALIBRATION
COEFFICIENT KD1
(6843)
This function shows the calibration coefficient KD1.
CALIBRATION
COEFFICIENT KD2
(6844)
This function shows the calibration coefficient KD2.