Endress+Hauser Proline Promass 83 - Group MAIN LINE; Function Group CONFIGURATION

Device Functions Proline Promass 83 FOUNDATION Fieldbus 5 Block USER INTERFACE
Endress+Hauser 27
5.2 Group MAIN LINE
5.2.1 Function group CONFIGURATION
USER INTERFACE C
⇒
CONTROL CAA
⇓
MAIN LINE CCA
⇒
CONFIGURATION 220
Function description
USER INTERFACE → MAIN LINE → CONFIGURATION
A0001253
1 = main line, 2 = additional line, 3 = information line
ASSIGN
(2200)
In this function, a value to be displayed is assigned to the main line (top line in the local
display). This value is displayed during normal operation.
Options (standard):
OFF
MASS FLOW
MASS FLOW IN %
VOLUME FLOW
VOLUME FLOW IN %
CORRECTED VOLUME FLOW
CORRECTED VOLUME FLOW IN %
DENSITY
REFERENCE DENSITY
TEMPERATURE
TOTALIZER (1 to 3)
AI (1 to 8) - OUT VALUE
PID - IN VALUE (controlled variable)
PID - CAS_IN VALUE (external set point)
PID - OUT VALUE (manipulated variable)
Factory setting:
MASS FLOW
(Continued on next page)
Esc
E
+
-
1
2
3