Endress+Hauser Proline Promass 83 - Function Group FUNCTION BLOCKS

7 Block BASIC FUNCTION Device Functions Proline Promass 83 FOUNDATION Fieldbus
50 Endress+Hauser
7.1.2 Function group FUNCTION BLOCKS
BASIC FUNCTION G
⇒
FOUNDATION FIELDBUS GGA
⇒
CONFIGURATION 620
⇓
FUNCTION BLOCKS 622
Function description
BASIC FUNCTION → FOUNDATION FIELDBUS → FUNCTION BLOCKS
BLOCK SELECTION
(6220)
In this function, a function block can be selected, whose value and status is shown in
the following functions.
Options:
ANALOG INPUT 1 to 8
PID
Factory setting:
ANALOG INPUT 1
OUT VALUE
(6221)
Displays the output value OUT, incl. unit and status of the Analog Input or PID
function block selected in the function BLOCK SELECTION (6220).
IN VALUE
(6222)
! Note!
This function is not available unless the PID option was selected in the
BLOCK SELECTION (6220) function.
Display:
Displays the controlled variable IN, incl. unit and status of the Analog Input or PID
function block selected in the function BLOCK SELECTION (6220).
CASCADE_IN VALUE
(6223)
! Note!
This function is not available unless the PID option was selected in the
BLOCK SELECTION (6220) function.
Display:
Displays an analog set value, incl. units and status, taken over from an external function
block.