5 Block USER INTERFACE Device Functions Proline Promass 83 FOUNDATION Fieldbus
40 Endress+Hauser
5.4.2 Function group MULTIPLEX
USER INTERFACE C
⇒
CONTROL CAA
⇓
MAIN LINE CCA
⇓
ADDITION LINE CEA
⇓
INFORMATION LINE CGA
⇒
CONFIGURATION 260
⇓
MULTIPLEX 262
Function description
USER INTERFACE → INFORMATION LINE → MULTIPLEX
ASSIGN
(2620)
Use this function to define the second reading to be displayed in the information line
alternately (every 10 seconds) with the value defined in the ASSIGN function (2600).
Options:
OFF
MASS FLOW
MASS FLOW IN %
VOLUME FLOW
VOLUME FLOW IN %
CORRECTED VOLUME FLOW
CORRECTED VOLUME FLOW IN %
DENSITY
REFERENCE DENSITY
TEMPERATURE
MASS FLOW BAR GRAPH IN %
VOLUME FLOW BAR GRAPH IN %
CORRECTED VOLUME FLOW BAR GRAPH IN %
TOTALIZER (1 to 3)
OPERATING/SYSTEM CONDITION
FLOW DIRECTION READING
AI (1 to 8) - OUT VALUE
PID - IN VALUE (controlled variable)
PID - CAS_IN VALUE (external set point)
PID - OUT VALUE (manipulated variable)
DEVICE PD-TAG
Factory setting:
OFF
(Continued on next page)
To Next Page
Loading...
