Endress+Hauser Proline Promass 83 - QUICK SETUP GAS MEASUREMENT

Device Functions Proline Promass 83 FOUNDATION Fieldbus 4 Block QUICK SETUP
Endress+Hauser 21
4.2 Quick Setup "Gas Measurement"
!
Note!
The procedure is described in detail in the Operating Instructions for
Proline Promass 83 FOUNDATION Fieldbus, BA065D/06/en.
A0002618-en
Settings for the Gas Measurement Setup menu:
Fct. code Function name Suggested settings Description
Call up through the function matrix:
B QUICK SETUP QS-GAS MEASURE → Page 19
1004 QS-GAS MEASURE YES → Page 19
Basic configuration:
6420 EMPTY PIPE DETECTION No entry possible, the selection changes
automatically to OFF.
→ Page 54
6400 ASSIGN LOW FLOW CUT OFF For gas measurement we recommend
to switch off the low flow cut off.
OFF
→ Page 52
6402 ON-VALUE LOW FLOW CUT
OFF
If you do not switch off the low flow cut off:
0.0000
→ Page 52
6403 OFF-VALUE LOW FLOW CUT
OFF
If you do not switch off the low flow cut off:
50%
→ Page 52
+
+
E
1004B
6400
6402
6403
E
Esc
E
+
-
XXX.XXX.XX
Setup
Gas measurement
Quick
Setup
Assign
Low flow cut off
On value
Low flow cut off
Off value
Low flow cut off
HOME
POSITION