Device Functions Proline Promass 83 FOUNDATION Fieldbus 8 Block SPECIAL FUNCTION
Endress+Hauser 79
8.2.8 Function group ELECTRODYNAMIC SENSORS
SPECIAL FUNCTION H
⇒
DENSITY FUNCTIONS HAA
⇓
ADVANCED DIAGNOSTICS HEA
⇒
CONFIGURATION 740
⇓
ACQUISITION 741
⇓
MASS FLOW 742
⇓
DENSITY 743
⇓
REFERENCE DENSITY 744
⇓
TEMPERATURE 745
⇓
TUBE DAMPING 746
⇓
ELEC.-DYN. SENSORS 747
Function description
SPECIAL FUNCTION → ADVANCED DIAGNOSTICS → ELECTRODYNAMIC SENSORS
REFERENCE VALUE
ELECTRODYNAMIC
SENSORS
(7470)
The reference value for the electrodynamic sensors appears on the display.
Display:
5-digit floating-point number
ELECTRODYNAMIC
SENSORS
(7471)
The measuring values for the electrodynamic sensors appear on the display.
Display:
5-digit floating-point number
MINIMUM
ELECTRODYNAMIC
SENSORS
(7472)
The lowest value of the electrodynamic sensors since the saved values were last reset
appears on the display.
Display:
5-digit floating-point number
MAXIMUM
ELECTRODYNAMIC
SENSORS
(7473)
The highest value of the electrodynamic sensors since the saved values were last reset
appears on the display.
Display:
5-digit floating-point number
HISTORY
ELECTRODYNAMIC
SENSOR
(7474)
The last ten values of the electrodynamic sensors since the saved values were last reset
appear on the display.
Display:
5-digit floating-point number
DEVIATION
ELECTRODYNAMIC
SENSOR
(7475)
This function displays the deviation between the measured values for the electrodynamic
sensors and the reference values (FACTORY or USER) selected in the function
SELECT REFERENCE CONDITION (7402).
Display:
5-digit floating-point number
To Next Page
Loading...
