Endress+Hauser Proline Promass 83 - 10 Factory Settings; SI Units (Not for USA and Canada); Language; Low Flow Cut Off, Full Scale Value

10 Factory settings Device Functions Proline Promass 83 FOUNDATION Fieldbus
90 Endress+Hauser
10 Factory settings
10.1 SI units (not for USA and Canada)
10.1.1 Low flow cut off, full scale value, pulse value
10.1.2 Language
Nominal diameter Low flow cut off Full scale value
[mm] (approx. v = 0.04 m/s) (approx. v = 2.0 m/s)
10.08kg/h 4kg/h
2 0.40 kg/h 20 kg/h
4 1.80 kg/h 90 kg/h
88.00kg/h400kg/h
15 26.00 kg/h 1300 kg/h
15 FB 72.00 kg/h 3600 kg/h
25 72.00 kg/h 3600 kg/h
25 FB 180.00 kg/h 9000 kg/h
40 180.00 kg/h 9000 kg/h
40 FB 300.00 kg/h 15000 kg/h
50 300.00 kg/h 15000 kg/h
50 FB 720.00 kg/h 36000 kg/h
80 720.00 kg/h 36000 kg/h
100 1200.00 kg/h 60000 kg/h
150 2600.00 kg/h 130000 kg/h
250 7200.00 kg/h 360000 kg/h
FB = Full bore versions of Promass I
Country Language
Australia English
Belgium English
China Chinese
Denmark English
Germany Deutsch
England English
Finland Suomi
France Francais
Netherlands Nederlands
Hong Kong English
India English
Indonesia Bahasa Indonesia
Instruments International English
Italy Italiano
Japan Japanese
Malaysia English
Norway Norsk
Poland Polish
Portugal Portuguese
Austria Deutsch
Russia Russian
Sweden Svenska
Switzerland Deutsch
Singapore English
Spain Espanol
South Africa English
Thailand English
Czech Republic Czech
Hungary English