Device Functions Proline Promass 83 FOUNDATION Fieldbus 5 Block USER INTERFACE
Endress+Hauser 31
5.3 Group ADDITION LINE
5.3.1 Function group CONFIGURATION
USER INTERFACE C
⇒
CONTROL CAA
⇓
MAIN LINE CCA
⇓
ADDITION LINE CEA
⇒
CONFIGURATION 240
Function description
USER INTERFACE → ADDITION LINE → CONFIGURATION
A0001253
1 = main line, 2 = additional line, 3 = information line
ASSIGN
(2400)
In this function, a value to be displayed is assigned to the additional line (middle line in
the local display). This value is displayed during normal operation.
Options (standard):
OFF
MASS FLOW
MASS FLOW IN %
VOLUME FLOW
VOLUME FLOW IN %
CORRECTED VOLUME FLOW
CORRECTED VOLUME FLOW IN %
DENSITY
REFERENCE DENSITY
TEMPERATURE
MASS FLOW BAR GRAPH IN %
VOLUME FLOW BAR GRAPH IN %
CORRECTED VOLUME FLOW BAR GRAPH IN %
TOTALIZER (1 to 3)
AI (1 to 8) - OUT VALUE
PID - IN VALUE (controlled variable)
PID - CAS_IN VALUE (external set point)
PID - OUT VALUE (manipulated variable)
DEVICE PD-TAG
Factory setting:
TOTALIZER 1
(Continued on next page)
Esc
E
+
-
1
2
3
To Next Page
Loading...
