3 Block MEASURED VARIABLES Device Functions Proline Promass 83 FOUNDATION Fieldbus
18 Endress+Hauser
UNIT LENGTH
(0424)
Use this function to select the unit for displaying the length of the nominal diameter.
The unit you select here is valid for:
• Nominal diameter of the sensor (→ NOMINAL DIAMETER function (6804))
Options:
MILLIMETER
INCH
Factory setting:
MILLIMETER
UNIT PRESSURE
(0426)
Use this function to select the unit for pressure.
The unit you select here is valid for:
• Specified pressure (→ PRESSURE function (6501))
Options:
bar a
bar g
psi a
psi g
Factory setting:
bar g
Function description
MEASURED VARIABLES → SYSTEM UNITS → ADDITIONAL CONFIGURATION
To Next Page
Loading...
