Endress+Hauser Proline Promass 83 - Function Group MULTIPLEX

Device Functions Proline Promass 83 FOUNDATION Fieldbus 5 Block USER INTERFACE
Endress+Hauser 29
5.2.2 Function group MULTIPLEX
USER INTERFACE C
⇒
CONTROL CAA
⇓
MAIN LINE CCA
⇒
CONFIGURATION 220
⇓
MULTIPLEX 222
Function description
USER INTERFACE → MAIN LINE → MULTIPLEX
ASSIGN
(2220)
Use this function to define the second reading to be displayed in the main line
alternately (every 10 seconds) with the value defined in the ASSIGN function (2200).
Options (standard):
OFF
MASS FLOW
MASS FLOW IN %
VOLUME FLOW
VOLUME FLOW IN %
CORRECTED VOLUME FLOW
CORRECTED VOLUME FLOW IN %
DENSITY
REFERENCE DENSITY
TEMPERATURE
TOTALIZER (1 to 3)
AI (1 to 8) - OUT VALUE
PID - IN VALUE (controlled variable)
PID - CAS_IN VALUE (external set point)
PID - OUT VALUE (manipulated variable)
Factory setting:
OFF
Advanced options with optional software package CONCENTRATION:
TARGET MASS FLOW
% TARGET MASS FLOW
TARGET VOLUME FLOW
% TARGET VOLUME FLOW
CORRECTED TARGET VOLUME FLOW
CARRIER MASS FLOW
% CARRIER MASS FLOW
CARRIER VOLUME FLOW
% CARRIER VOLUME FLOW
CORRECTED CARRIER VOLUME FLOW
% BLACK LIQUOR
° BAUME
° API
° PLATO
° BALLING
° BRIX
(Continued on next page)