136 Using the Printer Software with Windows
❏ Be sure to set EPSON Status Monitor so that the shared printer
can be monitored on the print server. See "Notice Settings" on
page 117.
❏ Set the security for the shared printer (access right for clients).
Clients cannot use the shared printer without right. For details,
see Windows help.
You need to set the client computers so that they can use the
printer on a network. See the following pages for details:
❏ "With Windows Me or 98" on page 137
❏ "With Windows XP or 2000" on page 138
Setting up clients
This section describes how to install the printer driver by
accessing the shared printer on a network.
Note:
❏ To share the printer on a Windows network, you need to set the print
server. For details, see "Setting up your printer as a shared printer"
on page 129 (Windows Me or 98) or "Using an additional driver"
on page 130 (Windows XP, 2000, or Server 2003).
❏ This section describes how to access the shared printer on a standard
network system using the server (Microsoft workgroup). If you
cannot access the shared printer due to the network system, ask the
administrator of the network for assistance.
❏ This section describes how to install the printer driver by accessing
the shared printer from the Printers folder. You can also access the
shared printer from Network Neighborhood or My Network on the
Windows desktop.
❏ You cannot use the additional driver on the server system OS.
To Next Page
Loading...
Need help?
General