Epson AcuLaser C4200DN - Hard Disk Drive

Installing Options 295
8
8
8
8
8
8
8
8
8
8
8
8
Removing a memory module
c
Caution:
Before you remove a memory module, be sure to discharge any
static electricity by touching a grounded piece of metal.
Otherwise, you may damage static-sensitive components.
w
Warning:
Be careful when working inside the printer as some components
are sharp and may cause injury.
Note:
If the optional Hard Disk Drive is installed, remove it before uninstalling
a memory module.
Perform the installation procedure in reverse.
Hard Disk Drive
The optional Hard Disk Drive allows you to expand the printer’s
input buffer when the Ethernet interface is used, and gives you
additional memory for graphics, form data, and faster multi-page,
multi-output sorting.
Installing the Hard Disk Drive
New :quote the information from the similar product/ delete note text in hostbase product (except new hostbase).
Follow the steps below to install the Hard Disk Drive.
c
Caution:
Before you install the Hard Disk Drive, be sure to discharge any
static electricity by touching a grounded piece of metal.
Otherwise, you may damage static-sensitive components.