Replacing Consumable Products 325
9
9
9
9
9
9
9
9
9
9
9
9
Fuser Unit
Handling precautions
New :quote the information from the similar product
Always observe the following handling precautions when
replacing the consumable products.
Do not touch the surface of the consumable product. Doing so
may impair print quality.
w
Warning:
❏ The fuser unit can be very hot if the printer has been in use.
Turn the printer off and wait for 30 minutes until the
temperature has subsided before replacing the fuser unit.
❏ Keep the consumable products out of the reach of children.
Replacing the fuser unit
Follow the steps below to replace the fuser unit.
To Next Page
Loading...
Need help?
General