52 Paper Handling
7. Reinsert the cassette into the unit.
Note:
❏ After loading paper, set the LC 1 Size through LC 4 Size
and LC 1 Type through LC 4 Type settings on the control
panel to match the loaded paper size and type.
❏ If you have installed and loaded paper into the optional paper
cassette unit, set the setting for the cassette that you are using.
Output tray
New :the information about the other output tray, quote from the similar product/ Face down
The output tray is located on the top of the printer. Since printouts
are output face-down, this tray is also referred to as the face-down
tray. Raise the stopper to prevent your printouts from slipping off
the printer.
To Next Page
Loading...
