Epson AcuLaser C4200DN User Manual

Using the PostScript Printer Driver 195
6
6
6
6
6
6
6
6
6
6
6
6
For Macintosh
Any Macintosh computer to which the printer is connected must
be running Mac OS 9 ver. 9.1 or later, or Mac OS X ver. 10.2.x or
later. See the following table for details.
Mac OS X
Note:
To use binary data, Epson recommends that you use AppleTalk for the
printer’s network connection. If you use a protocol other than AppleTalk
for the network connection, you need to set Binary to On in the PS3
Menu on the control panel. If you use the printer with a local connection,
you cannot use binary data.
Mac OS 9
Note:
To use binary data, Epson recommends that you use AppleTalk for the
printer’s network connection. If you use a local connection or a protocol
other than AppleTalk for the network connection, you cannot use binary
data.
Minimum Recommended
Computer Power Mac G3, G4, G5, iMac, eMac, PowerBook G3, G4, or iBook
Hard Disk —
Memory 128 MB
Minimum Recommended
Computer Power PC
Hard Disk 3.1 MB free
(for driver installation)
4 MB free
(for driver installation)
Memory 4 MB 32 MB

Epson AcuLaser C4200DN Specifications

General

Brand	Epson
Model	AcuLaser C4200DN
Category	Printer
Language	English