356 Troubleshooting
w
Warning:
❏ Be careful not to touch the fuser, which is marked CAUTION
HIGH TEMPERATURE, or the surrounding areas. If the
printer has been in use, the fuser and the surrounding areas
may be very hot.
❏ Do not insert your hand deep into the fuser unit as some
components are sharp and may cause injury.
Paper Jam A B
New :title is accord as panel message (STM3 message)
Follow the steps below to clear the jammed paper at cover A and
B.
1. Press the latch on cover A and open the cover.
To Next Page
Loading...
