184 Using the Printer Software with Macintosh
Setting Up the USB Connection
Note:
If you are connecting the USB cable to your Macintosh through a USB
hub, be sure to connect using the first hub in the chain. The USB interface
may be unstable depending on the hub used. If you experience problems
with this type of setup, connect the USB cable directly to your computer’s
USB connector.
For Mac OS X users
1. Open the Applications folder on your hard drive, then open
the Utilities folder and double-click the Printer Setup Utility
(for Mac OS X 10.3) or Print Center (for Mac OS X 10.2 or
below) icon.
2. Click Add Printer in the Printer List dialog box.
3. Select EPSON USB from the pop-up menu. Select your printer
icon in the Product list, then click Add.
g. Save button (Mac
OS X only):
Saves new changes and closes the dialog
box.
To Next Page
Loading...
Need help?
General